
Electrolux dishwashers have a good reputation for efficiency and durability. But an Electrolux dishwasher not draining is more common than you might think.
A few things can keep a dishwasher from draining, and knowing them helps you find the fix and get back to clean dishes.
Common Causes of an Electrolux Dishwasher Not Draining
An Electrolux dishwasher not draining usually comes down to the filter, the drain hose or the drain pump. Here’s how each one fails.
Clogged Filter
The filter catches food and debris before they reach the drain. When the filter itself clogs, water can’t get through and stands in the bottom of the dishwasher. To clean it:
- Find the filter at the bottom of your Electrolux dishwasher. It’s usually a cylindrical or mesh piece you unscrew or pull out.
- Take it out and look for food debris, grease or gunk.
- Rinse it in warm, soapy water and loosen stuck particles with a soft brush. Don’t scrub hard, which can damage it. Rinse off all the soap so it doesn’t make suds.
- Put the filter back and lock it in place.
Clean the filter regularly instead of waiting for it to clog, and you can keep the drain problem from starting.
Blocked Drain Hose or Sink Drain
The drain hose carries water from the dishwasher into your plumbing. Food, grease or small objects can get trapped in it and restrict the flow. The dishwasher also shares a drain line with the kitchen sink, so a clogged sink drain can siphon water back into the dishwasher. To rule these out:
- Turn off power to the dishwasher.
- Find the drain hose, usually at the back of the unit, connected to the sink drain or garbage disposal.
- Detach the hose carefully and check for blockages. Keep a bucket handy for water left in the hose.
- Clear debris with a long, flexible brush or a small plumber’s snake, without puncturing the hose.
- Reattach the hose securely and test the dishwasher.
- Watch the kitchen sink during the drain cycle. If water comes up into the sink even slightly, the sink has a minor clog. Clear the drain or call a plumber.
- Bonus Tip: The dishwasher drain line should have a high “loop,” like a roller coaster going upside down, usually held in place with a zip tie. The loop prevents back-siphoning and gives water a clean path out through the kitchen drain line.
Clean the drain hose regularly too. If you see cracks or holes, replace it right away to avoid leaks and water damage.
Malfunctioning Drain Pump
The drain pump pushes water out of the dishwasher, and like any mechanical part it eventually wears out. If the motor fails or gets damaged, the water stays put.
Signs of a bad drain pump include grinding, humming, or no sound at all. Repairing or replacing it is a job for a professional, since it involves electrical and mechanical work. If you’re comfortable, test the voltage at the drain pump with a multimeter. If voltage is there but the unit won’t drain, the pump itself is likely the problem.
Faulty Control Board or Panel
The control board (or timer on older models) is the brain of the appliance, sending voltage to the right parts. If it isn’t powering the pump, the dishwasher won’t drain. If you’re comfortable, check for voltage at the pump with a multimeter. No voltage can mean a faulty control board. That’s a more advanced repair, best left to a qualified service company.
If you suspect the pump or control board, schedule an Electrolux appliance service with BA Appliance Repair Service.
How to Troubleshoot and Fix a Non-Draining Electrolux Dishwasher
For an Electrolux dishwasher not draining, work through these steps:
- Inspect the Filter and Clean:Check the filter for debris or clogs and clean it thoroughly.
- Examine the Drain Hose and Clear Blockages:If a clean filter doesn’t help, check the drain hose for kinks, clogs or blockages and clear them.
- Listen for Drain Pump Sounds:During a cycle, listen to the dishwasher. A healthy drain pump hums gently. Grinding, rattling or silence can mean it’s failing.
- Check Voltage Between Pump and Control Board:If you have repair experience, test voltage at these parts to narrow down which one failed. In most cases, we’d recommend calling a professional.
If these steps don’t work, book a professional dishwasher repair. Our technicians at BA Appliance Repair Service can diagnose and repair your Electrolux dishwasher’s drain system.
Need Help? Schedule an Appointment
Complicated repairs are risky to do on your own. Let a BA Appliance Repair Service technician find the real cause of your Electrolux dishwasher not draining and fix it. Call (513) 233-8209 or book online.
Final Thoughts
Regular maintenance keeps drain problems away and helps your dishwasher last. Clean the filter and hose regularly and deal with small problems early to cut the chances of your Electrolux dishwasher not draining.
BA Appliance Repair Service serves the Cincinnati area and repairs Electrolux and other brands. If your dishwasher or another appliance is giving you trouble, give us a call.